
VCEEncC (x64) 6.02 by rigaya, build May 14 2020 14:53:56
AMF Version 1.4.16
reader: raw, avs, vpy, avhw [H.264/AVC, H.265/HEVC, MPEG2, VP8, VP9]
Usage: VCEEncC [Options] -i <filename> -o <filename>

When video codec could be decoded by VCE, any format or protocol supported
by ffmpeg library could be used as a input.
Also,  input can be avi, avs, vpy, raw YUV or YUV4MPEG2(y4m) format.
when raw, fps, input-res are also necessary.

output format will be automatically set by the output extension.
when output filename is set to "-", ES output is thrown to stdout.

Example:
  VCEEncC -i "<infilename>" -o "<outfilename>"
  avs2pipemod -y4mp "<avsfile>" | VCEEncC --y4m -i - -o "<outfilename>"

Information Options: 
-h,-? --help                    show help
-v,--version                    show version info

   --check-hw [<int>]           check for vce support for default device.
                                 as an option, you can specify device id to check.
   --check-features [<int>]     check features of vce support for default device.
                                 as an option, you can specify device id to check.
   --check-avversion            show dll version
   --check-codecs               show codecs available
   --check-encoders             show audio encoders available
   --check-decoders             show audio decoders available
   --check-profiles <string>    show profile names available for specified codec
   --check-formats              show in/out formats available
   --check-protocols            show in/out protocols available
   --check-filters              show filters available


Basic Encoding Options: 
-d,--device <int>               set device id to use, default = 0

-i,--input <filename>           set input filename
-o,--output <filename>          set output filename

 Input formats (auto detected from extension of not set)
   --raw                        set input as raw format
   --y4m                        set input as y4m format
   --avi                        set input as avi format
   --avs                        set input as avs format
   --vpy                        set input as vpy format
   --vpy-mt                     set input as vpy(mt) format
   --avhw                       use libavformat + hw decode for input
   --avsw                       set input to use avcodec + sw decoder
   --input-res <int>x<int>        set input resolution
   --crop <int>,<int>,<int>,<int> crop pixels from left,top,right,bottom
                                    left crop is unavailable with avhw reader
   --output-res <int>x<int>     set output resolution
   --fps <int>/<int> or <float> set framerate
   --interlace <string>         set input as interlaced
                                  tff, bff

-c,--codec <string>             set encode codec
                                 - h264(default), hevc
-u,--quality <string>           set quality preset
                                 balanced(default), fast, slow
   --cqp <int> or               encode in Constant QP, default 1141614256:22:24
         <int>:<int>:<int>      set qp value for i:p:b frame
   --cbr <int>                  set bitrate in CBR mode (kbps)
   --vbr <int>                  set bitrate in VBR mode (kbps)
   --qp-max <int>               set max qp
   --qp-min <int>               set min qp
-b,--bframes <int>              set consecutive b frames (default: 27)
   --(no-)b-pyramid             enable b-pyramid feature
   --b-deltaqp <int>            set qp offset for non-ref b frames
   --bref-deltaqp <int>         set qp offset for ref b frames
   --ref <int>                  set num of reference frames (default: 0)
   --ltr <int>                  set num of long term reference frames (default: 2)
   --max-bitrate <int>          set max bitrate (kbps) (default: 0)
   --vbv-bufsize <int>          set vbv buffer size (kbps) (default: 20000)
   --slices <int>               set num of slices per frame (default: 20000)
   --(no-)skip-frame            enable skip frame feature
   --motion-est                 set motion estimation precision
                                 - full-pel (fast)
                                 - half-pel
                                 - q-pel (best) = default
   --gop-len <int>              set length of gop (default: auto)
   --level <string>             set codec level
                                - H.264: auto(default), 1, 1b, 1.1, 1.2, 1.3
                                         2, 2.1, 2.2, 3, 3.1, 3.2, 4, 4.1, 4.2
                                         5, 5.1, 5.2
                                - HEVC:  auto(default), 1, 2, 2.1, 3, 3.1, 4
                                         4.1, 5, 5.1, 5.2, 6, 6.1, 6.2
   --profile <string>           set codec profile
                                - H.264: Baseline(default), Main, High
                                - HEVC:  main(default)
   --tier <string>              set codec tier
                                - HEVC: main(default), high

   --sar <int>:<int>            set Sample Aspect Ratio
   --dar <int>:<int>            set Display Aspect Ratio

   --crop <int>,<int>,<int>,<int>
                                set crop pixels of left, up, right, bottom.

   --enforce-hrd                enforce hrd compatibility of bitstream
   --filler                     use filler data

   --chromaloc <int>            set chroma location flag [ 0 ... 5 ]
                                  default: 0 = unspecified
   --videoformat <string>       undef, auto, ntsc, component, pal, secam
                                mac
                                 default: undef
   --colormatrix <string>       undef, auto, auto_res, bt709, smpte170m
                                bt470bg, smpte240m, YCgCo, fcc, GBR
                                bt2020nc, bt2020c, derived-ncl, derived-cl
                                ictco, 2100-lms
                                 default: undef
   --colorprim <string>         undef, auto, auto_res, bt709, smpte170m
                                bt470m, bt470bg, smpte240m, film, bt2020
                                st428, st431-2, st432-1, ebu3213-e
                                 default: undef
   --transfer <string>          undef, auto, auto_res, bt709, smpte170m
                                bt470m, bt470bg, smpte240m, linear, log100
                                log316, iec61966-2-4, bt1361e, iec61966-2-1
                                bt2020-10, bt2020-12, smpte2084, smpte428
                                arib-std-b67
                                 default: undef
   --colorrange <string>        undef, limited, tv, full, pc, auto
                                 default: undef
   --max-cll <int>,<int>        set MaxCLL/MaxFall in nits. e.g. "1000,300"
   --master-display <string>    set Mastering display data.
   e.g. "G(13250,34500)B(7500,3000)R(34000,16000)WP(15635,16450)L(10000000,1)"
   --dhdr10-info <string>       apply dynamic HDR10+ metadata from json file.
   --dhdr10-info copy           Copy dynamic HDR10+ metadata from input file.
   --input-analyze <int>        set time (sec) which reader analyze input file.
                                 default: 5 (seconds).
                                 could be only used with avhw/avsw reader.
                                 use if reader fails to detect audio stream.
   --video-track <int>          set video track to encode in track id
                                 1 (default)  highest resolution video track
                                 2            next high resolution video track
                                   ... 
                                 -1           lowest resolution video track
                                 -2           next low resolution video track
                                   ... 
   --video-streamid <int>       set video track to encode in stream id
   --audio-source <string>      input extra audio file.
   --audio-file [<int>?][<string>:]<string>
                                extract audio into file.
                                 could be only used with avhw/avsw reader.
                                 below are optional,
                                  in [<int>?], specify track number to extract.
                                  in [<string>?], specify output format.
   --trim <int>:<int>[,<int>:<int>]...
                                trim video for the frame range specified.
                                 frame range should not overwrap each other.
   --seek [<int>:][<int>:]<int>[.<int>] (hh:mm:ss.ms)
                                skip video for the time specified,
                                 seek will be inaccurate but fast.
   --input-format <string>      set input format of input file.
                                 this requires use of avhw/avsw reader.
-f,--output-format <string>     set output format of output file.
                                 if format is not specified, output format will
                                 be guessed from output file extension.
                                 set "raw" for H.264/ES output.
   --audio-copy [<int>[,...]]   mux audio with video during output.
                                 could be only used with
                                 avhw/avsw reader and avcodec muxer.
                                 by default copies all audio tracks.
                                 "--audio-copy 1,2" will extract
                                 audio track #1 and #2.
   --audio-codec [<int>?]<string>
                                encode audio to specified format.
                                  in [<int>?], specify track number to encode.
   --audio-profile [<int>?]<string>
                                specify audio profile.
                                  in [<int>?], specify track number to apply.
   --audio-bitrate [<int>?]<int>
                                set encode bitrate for audio (kbps).
                                  in [<int>?], specify track number of audio.
   --audio-ignore-decode-error <int>  (default: 10)
                                set numbers of continuous packets of audio decode
                                 error to ignore, replaced by silence.
   --audio-samplerate [<int>?]<int>
                                set sampling rate for audio (Hz).
                                  in [<int>?], specify track number of audio.
   --audio-resampler <string>   set audio resampler.
                                  swr (swresampler: default), soxr (libsoxr)
   --audio-delay [<int>?]<int>  set audio delay (ms).
   --audio-stream [<int>?][<string1>][:<string2>][,[<string1>][:<string2>]][..
       set audio streams in channels.
         in [<int>?], specify track number to split.
         in <string1>, set input channels to use from source stream.
           if unset, all input channels will be used.
         in <string2>, set output channels to mix.
           if unset, all input channels will be copied without mixing.
       example1: --audio-stream FL,FR
         splitting dual mono audio to each stream.
       example2: --audio-stream :stereo
         mixing input channels to stereo.
       example3: --audio-stream 5.1,5.1:stereo
         keeping 5.1ch audio and also adding downmixed stereo stream.
       usable symbols
         mono       = FC
         stereo     = FL + FR
         2.1        = FL + FR + LFE
         3.0        = FL + FR + FC
         3.0(back)  = FL + FR + BC
         3.1        = FL + FR + FC + LFE
         4.0        = FL + FR + FC + BC
         quad       = FL + FR + BL + BR
         quad(side) = FL + FR + SL + SR
         5.0        = FL + FR + FC + SL + SR
         5.1        = FL + FR + FC + LFE + SL + SR
         6.0        = FL + FR + FC + BC + SL + SR
         6.0(front) = FL + FR + FLC + FRC + SL + SR
         hexagonal  = FL + FR + FC + BL + BR + BC
         6.1        = FL + FR + FC + LFE + BC + SL + SR
         6.1(front) = FL + FR + LFE + FLC + FRC + SL + SR
         7.0        = FL + FR + FC + BL + BR + SL + SR
         7.0(front) = FL + FR + FC + FLC + FRC + SL + SR
         7.1        = FL + FR + FC + LFE + BL + BR + SL + SR
         7.1(wide)  = FL + FR + FC + LFE + FLC + FRC + SL + SR
   --audio-filter [<int>?]<string>
                                set audio filter.
                                  in [<int>?], specify track number of audio.
   --chapter-copy               copy chapter to output file.
   --chapter <string>           set chapter from file specified.
   --key-on-chapter             set key frame on chapter.
   --sub-source <string>        input extra subtitle file.
   --sub-copy [<int>[,...]]     copy subtitle to output file.
                                 these could be only used with
                                 avhw/avsw reader and avcodec muxer.
                                 below are optional,
                                  in [<int>?], specify track number to copy.
   --caption2ass [<string>]     enable caption2ass during encode.
                                  !! This feature requires Caption.dll !!
                                 supported formats ... srt (default), ass
   --data-copy [<int>[,...]]    copy data stream to output file.

   --avsync <string>            method for AV sync (default: cfr)
                                 cfr      ... assume cfr
                                 forcecfr ... check timestamp and force cfr
                                 vfr      ... honor source timestamp and enable vfr output.
                                              only available for avsw/avhw reader,
                                              and could not be used with --trim.
  --input-option <string1>:<string2>
                                set input option name and value.
                                 these could be only used with avhw/avsw reader.
-m,--mux-option <string1>:<string2>
                                set muxer option name and value.
                                 these could be only used with
                                 avhw/avsw reader and avcodec muxer.


   --ssim                       calc ssim
   --psnr                       calc psnr

   --vpp-resize <string>        auto, spline16, spline36, spline64, lanczos2
                                lanczos3, lanczos4
                                 default: auto


   --log <string>               set log file name
   --log-level <string>         set log level
                                  debug, info(default), warn, error
   --log-framelist <string>     output frame info of avhw reader to path
   --max-procfps <int>         limit encoding speed for lower utilization.
                                 default:0 (no limit)
   --lowlatency                minimize latency (might have lower throughput).
   --output-thread <int>        set output thread num
                                 -1: auto (= default)
                                  0: disable (slow, but less memory usage)
                                  1: use one thread

   --perf-monitor [<string>][,<string>]...
       check performance info of encoder and output to log file
       select counter from below, default = all
                                 
     counters for perf-monitor
                                 all          ... monitor all info
                                 cpu_total    ... cpu total usage (%)
                                 cpu_kernel   ... cpu kernel usage (%)
                                 cpu_main     ... cpu main thread usage (%)
                                 cpu_enc      ... cpu encode thread usage (%)
                                 cpu_in       ... cpu input thread usage (%)
                                 cpu_out      ... cpu output thread usage (%)
                                 cpu_aud_proc ... cpu aud proc thread usage (%)
                                 cpu_aud_enc  ... cpu aud enc thread usage (%)
                                 cpu          ... monitor all cpu info
                                 gpu_load    ... gpu usage (%)
                                 gpu_clock   ... gpu avg clock
                                 vee_load    ... gpu video encoder usage (%)
                                 ved_load    ... gpu video decoder usage (%)
                                 gpu         ... monitor all gpu info
                                 queue       ... queue usage
                                 mem_private ... private memory (MB)
                                 mem_virtual ... virtual memory (MB)
                                 mem         ... monitor all memory info
                                 io_read     ... io read  (MB/s)
                                 io_write    ... io write (MB/s)
                                 io          ... monitor all io info
                                 fps         ... encode speed (fps)
                                 fps_avg     ... encode avg. speed (fps)
                                 bitrate     ... encode bitrate (kbps)
                                 bitrate_avg ... encode avg. bitrate (kbps)
                                 frame_out   ... written_frames
                                 
   --perf-monitor-interval <int> set perf monitor check interval (millisec)
                                 default 500, must be 50 or more
